* On Business Days - Purchases $100 or More
The Quantum Macc NTS 370 Vertical Semi-Automatic Cold Saw has a moveable head that can move up to 45 degrees right and left; and the head also has rotation stops at 45° - 0° - 45°. The NTS 370 has a vice that is complete with an anti-burr device, and a motor pump for blade lubrication. This unit is equipped with a bar stop, bar support arm, and service tools, as well as the machine's manual and steel pedestal. Electrical: The NTS-370 can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.
Cycle start is obtained by pressing the relevant start pedal. The machine performs the following operations during the cutting cycle:
Closing of Vice & Activation of Blade Motor.
Cutting Head Begins Down-Stroke.
Completes Cut & Head Returns to Initial Position & Blade Motor Stops.
The Vice will then Open.
Options (Options are at an additional cost):
(+$1,000) Equip the NTS 370 with a 2nd Vice
(+$1,100) Equip the NTS 370 with a Variable Speed Inverter
Round Tube Cutting Capacities:
Round Tube Cutting at 90° (Straight Cut): 5"
Round Tube Cutting at 45° Left: 5"
Round Tube Cutting at 45° Right: 5"
Square Tube Cutting Capacities:
Square Tube Cutting at 90° (Straight Cut): 4-5/8"
Square Tube Cutting at 45° Left: 3-7/8"
Square Tube Cutting at 45° Right: 3-7/8"
Solid Round Cutting Capacities:
Solid Round Cutting at 90° (Straight Cut): 3-7/8"
Solid Round Cutting at 45° Left: 3-7/8"
Solid Round Cutting at 45° Right: 3-7/8"
Rectangular Tube Cutting Capacities:
Rectangular Tube Cutting at 90° (Straight Cut): 3-7/8" x 6-5/8"
Rectangular Tube Cutting at 45° Left: 3-7/8" x 5-1/2"
Rectangular Tube Cutting at 45° Right: 3-7/8" x 5-1/2"
¢â‚¬â€ Blade Size Used: 370 x 2.5 x 32mm Bore HSS Blade
¢â‚¬â€ Cost Per 370mm Blade: $150 Each
¢â‚¬â€ 2 Speeds: 25 & 50 R.P.M.
¢â‚¬â€ Weight: 1,100 lbs. (500 kg.)
¢â‚¬â€ Maximum Vice Opening: 7.2¢â‚¬Â (185mm)
¢â‚¬â€ Overall Dimensions: 104¢â‚¬Â Width x 48¢â‚¬Â Length x 73¢â‚¬Â Height (2640 x 1200 x 1850 mm)
|Shipping Calculation:||All Shipping Costs are calculated after inventory is confirmed with the mfg.|