FREE DELIVERY FOR WELDING*
* On Business Days - Purchases $100 or More
2.5% OFF By paying with Check, Wire or ACH
Online and Call-Ahead Orders
* Minimal Purchase Price $100
Quantum Machinery 14.50" Fully-Automatic, Double-Column Cold Saw
The Quantum Macc NTA 370 Vertical Double-Column Fully-Automatic Cold Saw has a moveable head that can move up to 45 degrees right and left; and the head also has rotation stops at 45° - 0° - 45°. The NTA 370 has a vice that is complete with an anti-burr device, and a motor pump for blade lubrication. This unit is equipped with a bar stop, bar support arm, and service tools, as well as the machine's manual. The NTA 370 can store up to 9 programs, each of them with 99 steps for a total of about 890 cutting positions with relevant piece-counter.
Cycle start is obtained by pressing the relevant start pedal. The machine performs the following operations during the cutting cycle:
-
Feeding of Material.
-
Closing of Vice and Fixed Vice will Lock.
-
Activation of Blade Motor, Rotation of the Blade and Delivery of Coolant.
-
Cutting Head Begins Down-Stroke. (While the head is descending to make the cut, the Feeding Carriage will return to the fixed measure - preparing itself for the next step of feeding the material).
-
Completes Cut & Head Returns to Initial Position as Blade Motor and Coolant Stops.
-
The Vice will then Open (if there is another step, the step feeder will then begin to feed).
(REPEAT)
Options (Options are at an additional cost):
-
(+$1,100) Equip the NTA 370 with a 2nd Vice
-
(+$1,100) Equip the NTA 370 with a Variable Speed Inverter
NTA 370 COLD SAW CUTTING CAPACITIES:
Round Tube Cutting Capacities:
-
Round Tube Cutting at 90° (Straight Cut): 3"
-
Round Tube Cutting at 45° Left: 3"
-
Round Tube Cutting at 45° Right: 3"
Square Tube Cutting Capacities:
-
Square Tube Cutting at 90° (Straight Cut): 3"
-
Square Tube Cutting at 45° Left: 3"
-
Square Tube Cutting at 45° Right: 3"
Solid Round Cutting Capacities:
-
Solid Round Cutting at 90° (Straight Cut): 3"
-
Solid Round Cutting at 45° Left: 3"
-
Solid Round Cutting at 45° Right: 3"
Rectangular Tube Cutting Capacities:
-
Rectangular Tube Cutting at 90° (Straight Cut): 3-7/8" x 3"
-
Rectangular Tube Cutting at 45° Left: 3-7/8" x 3"
-
Rectangular Tube Cutting at 45° Right: 3-7/8" x 3"
NTA 370 COLD SAW SPECIFICATIONS:
¢â‚¬â€ Blade Size Used: 370 x 2.5 x 32mm Bore HSS Blade
¢â‚¬â€ Cost Per 370mm Blade: $150 Each
¢â‚¬â€ 2 Speeds: 25 & 50 R.P.M.
¢â‚¬â€ Weight: 1,985 lbs. (900 kg.)
¢â‚¬â€ Maximum Vice Opening: 7.2¢â‚¬Â (185mm)
¢â‚¬â€ Step Feeder Stroke Length: 23.60¢â‚¬Â
¢â‚¬â€ Overall Dimensions: 138¢â‚¬Â Width x 48¢â‚¬Â Length x 75¢â‚¬Â Height (3500 x 1200 x 1900 mm)
¢â‚¬â€ The NTA 370 can store up to 9 programs, each of them with 99 steps for a total of about 890 cutting positions with relevant piece-counter.
¢â‚¬â€ Tempered and ground vertical slider along with Tempered and ground vice jaws
¢â‚¬â€ Head lowering adjustment.
¢â‚¬â€ Equipped with the Shave breaker and Vice complete with Anti-Burr Device.
| Shipping Calculation: | All Shipping Costs are calculated after inventory is confirmed with the mfg. |
|---|