FREE DELIVERY FOR WELDING*
* On Business Days - Purchases $100 or More
2.5% OFF By paying with Check, Wire or ACH
Online and Call-Ahead Orders
* Minimal Purchase Price $100
Quantum Machinery 14" Semi-Auto, Double-Column Cold Saw (4-5/8" Round Tube Capacity)
The Quantum Macc NTM 350-S Vertical Semi-Automatic Cold Saw has a moveable head that can move up to 45 degrees left and 60 degrees right; and the head also has rotation stops at 45° - 0° - 45° - 60°. The NTM 350-S has a vice that is complete with an anti-burr device, motor pump for blade lubrication, shave breaker to keep the blade clean. This unit is equipped with a a 1 meter long bar stop, 1 meter long bar support arm, and service tools, as well as the machine's manual and steel pedestal. Electrical: The NTM 350-S can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.
Cycle start is obtained by pressing the relevant start pedal. The machine performs the following operations during the cutting cycle:
-
Closing of Vice & Activation of Blade Motor.
-
Cutting Head Begins Down-Stroke.
-
Completes Cut & Head Returns to Initial Position & Blade Motor Stops.
-
The Vice will then Open.
(REPEAT)
Options (Options are at an additional cost):
-
(+$900) Equip the NTM 350-S with a 2nd Vice
-
(+$1,100) Equip the NTM 350-S with a Variable Speed Inverter
NTM 350-S COLD SAW CUTTING CAPACITIES:
Round Tube Cutting Capacities:
-
Round Tube Cutting at 90° (Straight Cut): 4-5/8"
-
Round Tube Cutting at 45° Left: 4-5/8"
-
Round Tube Cutting at 45° Right: 4-5/8"
-
Round Tube Cutting at 60° Right: 3-1/2"
Square Tube Cutting Capacities:
-
Square Tube Cutting at 90° (Straight Cut): 3-7/8"
-
Square Tube Cutting at 45° Left: 3-1/2"
-
Square Tube Cutting at 45° Right: 3-1/2"
-
Square Tube Cutting at 60° Right: 3-1/2"
Solid Round Cutting Capacities:
-
Solid Round Cutting at 90° (Straight Cut): 3-7/8"
-
Solid Round Cutting at 45° Left: 3-7/8"
-
Solid Round Cutting at 45° Right: 3-7/8"
-
Solid Round Cutting at 60° Right: 3-1/2"
Rectangular Tube Cutting Capacities:
-
Rectangular Tube Cutting at 90° (Straight Cut): 3-1/2" x 6-5/8"
-
Rectangular Tube Cutting at 45° Left: 3-1/2" x 4-7/8"
-
Rectangular Tube Cutting at 45° Right: 3-1/2" x 4-7/8"
-
Rectangular Tube Cutting at 60° Right: 3-1/2" x 3-1/2"
NTM 350-S COLD SAW SPECIFICATIONS:
¢â‚¬â€ Blade Size Used: 350 x 2.5 x 32mm Bore HSS Blade
¢â‚¬â€ Cost Per 350mm Blade: $120 Each
¢â‚¬â€ 2 Speeds: 36 & 72 R.P.M.
¢â‚¬â€ Weight: 1,059 lbs. (480 kg.)
¢â‚¬â€ Maximum Vice Opening: 7.2¢â‚¬Â (185mm)
¢â‚¬â€ Overall Dimensions: 104¢â‚¬Â Width x 48¢â‚¬Â Length x 79¢â‚¬Â Height (2640 x 1200 x 2000 mm)
| Shipping Calculation: | All Shipping Costs are calculated after inventory is confirmed with the mfg. |
|---|