Quantum Machinery NARGESA Roll Bender / Section and Pipe Bending Machine

THE MC650 BENDING CAPACITIES:

• Round Tube #1: 3.5" x .150" with a Minimum Radius of 28" Inches

• Round Tube #2: 4" x .120" with a Minimum Radius of 30" Inches

• Square Tube #1: 1.5" x 1.5" x .120" with a Minimum Radius of 14" Inches

• Square Tube #2: 2.75" x 2.75" x .150" with a Minimum Radius of 30" Inches

• Angle (Leg-Out) #1: 1.5" with a Minimum Radius of 10" Inches

• Angle (Leg-Out) #2: 2.75" with a Minimum Radius of 24" Inches

• Flat Bar (Easy Way) #1: 3.15" x 0.75" with a Minimum Radius of 8" Inches

• Flat Bar (Easy Way) #2: 4" x 1" with a Minimum Radius of 15" Inches

• Flat Bar (Hard Way) #1: 3.15" x 0.75" with a Minimum Radius of 18" Inches

• Flat Bar (Hard Way) #2: 4" x 0.75" with a Minimum Radius of 50" Inches

THE MC650 FEATURES AND SPECIFICATIONS:

• All 3 Rolls are Driven.

• Rollers Speed: 5 R.P.M.

• Motor Power: 3 KW

• Weight of Machine: 2,760 lbs.

• Useful Axes Length: 6.29" / 160mm

• Diameter of Rollers: 7.95" / 202mm

• MC-650 Machine Dimensions: 51" x 39" x 51"

• Diameter of Axes: 2.55" Lower / 3.15" Higher (65mm Lower / 80mm Higher)

• Voltages Available: 220 Volt / 3 Phase, 480 Volt / 3 Phase or 220 Volt / 1 Phase

• Safe transmision by treated and flat pinions.

• Steel treated and rectified axis.

• Improved energy efficiency with Electro-Hydraulic Operation.

• Max. bending capacity in round tube: 4 inches or 101.6mm.

• Visual display of dimensions.

• Bending limits programmable with potentiometers.

• Bender operations control desk supplied as standard with the machine.

• Horizontal and vertical working position, without needing to fit special accessories. The MC650 Nargesa Section and Tube & Pipe bending machine has been designed to work in either vertical or horizontal position without needing to fit any extra accessories. Its structure enables it to be laid down to work in the horizontal position - ideal for large diameter work or installations with height limitations.

• Side corrector rollers to rule the bending operation supplied as standard with the machine.

• Straightener rollers to curve angles supplied as standard with the machine.

• Electronically controlled positioning of the asymmetric rollers.

• Three traction rollers, ideal and essential to bend round pipe, with smooth surface not to get the pipe or profile damaged.

• Bending regulation apart from the lower rollers which permits to make bending operations in smaller diameters and to give better use to the material than in other bending machines.

• It's equipped with 9 standard rollers by means of which you can make all kinds of profiles. Square pipe, rectangular, solid square bar, round and rectangular, U profile, T profile, angle, flat bar, edge flat bar... Optional rollers can be supplied for round pipe or tube (See optional accessories at the bottom of the page)