FREE DELIVERY FOR WELDING*

* On Business Days - Purchases $100 or More

2.5% OFF By paying with Check, Wire or ACH

Online and Call-Ahead Orders

* Minimal Purchase Price $100
Piranha P110 Hydraulic Ironworker Machine

Piranha P110 Hydraulic Ironworker Machine

Piranha PII88 Hydraulic Ironworker Machine

Piranha PII88 Hydraulic Ironworker Machine

Piranha P140 Hydraulic Ironworker Machine

P-140 Single Operator Ironworker Machine

With 140 tons of punching force, the Piranha Model P-140 is truly the king of single operator ironworker machines.

  • The P-140 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher.
  • The P-140 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds
  • The P-140 has full electrical control of its stroke with a footswitch and limit switch stroke controls for fast punching cycles.
  • The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-140s capabilities.
  • Piranhas incomparable integrated coper/notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part from any angle.

When comparing ironworkers, look at the complete package

was $50,290.00 Special Price $49,495.00
SKU
P140

P-140 Single Operator Ironworker Machine

With 140 tons of punching force, the Piranha Model P-140 is truly the king of single operator ironworker machines.

  • The P-140 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher.
  • The P-140 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds
  • The P-140 has full electrical control of its stroke with a footswitch and limit switch stroke controls for fast punching cycles.
  • The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-140s capabilities.
  • Piranhas incomparable integrated coper/notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part from any angle.

When comparing ironworkers, look at the complete package

Standard Features

  • Complete Punching Attachment with split dove tail mounting
  • 5 Punch and Die sets
  • Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear
  • Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
  • Remote Electric Foot Switch that can be connected at either end of the machine
  • Electric Limit Switches that can be set for stroke control when using foot control
  • Set of Round Bar Knives [2 way] (customers choice to 2)
  • Set of 16.625 Plate Shear Knives [4 way]
  • Set of 20.5 Plate Shear Knives [4 way] (instead of Round Bar Knives and 16.625 Plate Shear Knives)
  • Extra Blank Knife to extend shear to 20.5
  • Set of Angle Knives [8 way top] [4 way bottom]
  • Set of Coper Knives [2 way top] [4 way bottom]
  • Chip Buckets (2 each)
  • Extra Oil Filter
  • Coupling Wrench & 3/8 Allen Wrench
  • Integral Lifting Lug for instant portability
Throat Depth 12 Coper-Notcher (Tons) (Max.) 95 4 x 6 x 3/8
Open Height 15-1/2 Bending Attachment (Optional) 12, 24
Closed Height w/o Die Block 10-1/4 Punch End Strokes Per Minute Optional Speed-Up Kit 30 @ 3/4 41 @ 3/4
Stroke Length 5-1/4 Work Station Height Approx. 44
Platen Table Size (D-W) 14-1/2 x 21 Hydraulics Pump GPM System R/V PSI 10.5 3200
Punch Hole Size (Max. Material) Max. Hole Size (Material) 110 Tons 1-7/16 (1) 5 (1/4) Fluid Capacity (gal.) 25
Plate Shear 20-1/2 Long 1 x 12 3/4 x 18 1/2 x 20 Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available 10 HP 3 Ph.
Angle Shear 6 x 6 x 5/8 Dimensions (Net) W-L-H Approx. 35 x 90 x 66-1/2
Bar Shear Round (min. to max.) Square (min. to max.) 1/2 to 2 1/2 to 1-3/8 Weight (Net) Lbs. Approx. 5800

More Information
Shipping Cost 0.000
Shipping Calculation: All Shipping Costs are calculated after order is placed and inventory is confirmed
Write Your Own Review
You're reviewing:Piranha P140 Hydraulic Ironworker Machine
Your Rating