Laguna Tools Supermax 37" X 2 Double Drum Sander with Casters
Double Drum Sander, 220V, 5HP, 1PH - (includes casters).
Sand two grits in a single pass with a 372 Double Drum Sander. Featuring INTELLISAND Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding. The 372 Double Drum Sander features INTELLISAND Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor with single Phase power.
Questions? Call us at (781) 937-5655
- INTELLISAND Technology:Automatically adjusts conveyor speed based on load. Prevents gouging, damaging or burning stock.
- Provides consistent finish even with varying grain pattern and density.
- Greatly increases abrasive planing and dimensioning speed.
- Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no flexin in conveyor, guaranteeing flatness to less than .010 across the width of the sander.
- Abrasive conveyor beltoffers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner.
- Patented Abrasive Attachment Systemeffectively tensions the abrasive wraps, preventing loose abrasive and overlap.
- Easiest accessto abrasive fastening system of any drum sander!
- Machine design includes additional space around abrasive, eliminating the need for special tools. Self-coolingdrum prevents overheating and extends abrasive life.
- Sanding Capacity: Maximum Width (in): 25, 37, 50.Minimum Length (in): 3-1/2. Maximum Thickness (in): 25 model: 6 37 & 50 models: 12 Minimum Thickness (in): 1/32.
- Dimensions HxWxD (in): 25 model: 43 x 46 x 31. 37 model: 43 x 58 x 31. 50 model: 50 x 71 x 31 Drum (in): (extruded aluminum) 25 model: 5 x 25. 37 model: 5 x 37. 50 model: 5 x 50. Drum speed: 1740 RPM. Dust Hood: (Steel hood, hinged at back. 25in model: one (2) 4in vacuum port, min. 1000 CFM recommended. 37 & 50 models: (3) 4 vacuum ports, min. 1800 CFM recommended. Ball bearings (1in): 4, sealed and permanently lubricated.
- Conveyor Motor: 25 & 37 models: 100 in. -lb. torque, direct drive D.C motor, ranged variable, 0-15 FPM. 50 model: 220 in.-lb. torque, direct drive D.C motor, ranged variable, 0-15 FPM
- Drive Motor (TEFC): 25 & 37 models: 5 HP. 50 model: 7-1/2 H. Power
- Requirements: 208-230V, 60HZ; 1 Ph, 30 amp service; 3 Ph 20 amp service
- Shipping Weight (lbs): 25 model: 475. 37 model: 525. 50 model: 820
|Shipping Calculation:||All Shipping Costs are calculated after order is placed and inventory is confirmed|