FREE DELIVERY FOR WELDING*

* On Business Days - Purchases $100 or More

2.5% OFF By paying with Check, Wire or ACH

Online and Call-Ahead Orders

* Minimal Purchase Price $100
The Powermatic DDS-237, 37 in. Dual Drum Sander 7.5HP, 1PH, 230V in Woodworking, Sanders, Drum Sanders

The Powermatic DDS-237, 37 in. Dual Drum Sander 7.5HP, 1PH, 230V in Woodworking, Sanders, Drum Sanders

Baileigh HYDRAULIC PRESS BRAKE BP-14010 CNC

Baileigh HYDRAULIC PRESS BRAKE BP-14010 CNC

Baileigh PRESS BRAKE BP-11210 CNC

With 102' between all-steel uprights, this hydraulic press brake can bend 8-foot sheets of metal. The control system on this Baileigh press brake offers the latest technology for a fraction of the cost of other brands.

  • Delivers 120 tons of pressure.
  • Distance between the housings lets you slide in 8-foot pieces of mild steel.
  • Runs on 220-volt 3-phase power.
was $83,905.93 Special Price $69,099.00
SKU
1000781

DESCRIPTION

With 102' between all-steel uprights, this hydraulic press brake can bend 8-foot sheets of metal. The control system on this Baileigh press brake offers the latest technology for a fraction of the cost of other brands.

  • Delivers 120 tons of pressure.
  • Distance between the housings lets you slide in 8-foot pieces of mild steel.
  • Runs on 220-volt 3-phase power.
  • Industrial-grade hydraulic system with a Vickers/Eaton pump will last for many years at peak capacity.
  • NOK hydraulic seals from Japan are some of the best in the industry. They' ll keep the hydraulics running smoothly.
  • Torque tube connects the 2 hydraulic cylinders, so they stay synchronized and parallel to the bending table at all times.
  • Chain drive linkage keeps hydraulic cylinders in time with each other, so the machine stays balanced and lasts longer.
  • Hydraulic cylinders are near the back of the machine for convenient fluid changes.

ACCURATE, USER-FRIENDLY CONTROL SYSTEM

  • Runs in single-bend mode or programmable mode.
  • Comes standard with 2 axes of control: stroke and back gauge distance.
  • Simple controller is so intuitive that you could train someone to use it in 5 minutes.
  • Programmer stores up to 40 programs with up to 25 bends per program, great for saving time on production.
  • Bending is accurate to +/- .01mm, ensuring that parts come out right the first time.
  • Main electrical components made in Germany by Weidmueller and Schneider will give you years of trouble-free productivity.
  • Foot pedal brings the stroke up and down. Just input your specs on the controller, then press the pedal for each bend.
  • You can make a complete part without touching the controller. Push the metal in while pressing the foot pedal.
  • Choose between 2 speeds: a rapid approach and retract and a slow bending speed.
  • Speed option lets you reduce cycle time and make your shop more efficient.
  • Chain drive back gauge system uses tried-and-true technology that you can maintain easily.
  • The 23.62" back gauge can advance or retract according to programmed instructions.

STEEL PLATE CONSTRUCTION AND INCLUDED TOOLING

  • Fully-welded all-steel construction helps prevent deformation and minimize flex during the bending process.
  • Weighs a whopping 14,403 lbs. for massive structural strength that ensures accurate results.
  • Includes support arms around 2 feet in length.
  • Comes standard with tooling: a multi-vee bottom die and gooseneck punches (European Style).
  • Quick-release tool holders let you make changes easily. Just open a lever and it drops the top die out. No time-consuming cap screws!
  • Crowning adjustment dial gives you the option to deliver more pressure in the center of a bend for consistency all the way across.
  • Safety light curtains prevent the machine from bending when someone is too close.
  • Light curtains will swing open and get out of the way when you' re doing a tool change.

FAST SHIPPING AND LIFETIME AFTER-SALE CARE

  • This hydraulic press brake ships fully assembled. Just uncrate it, plug it in, and get started.
  • We keep machine handling to a minimum to reduce the risk of damage. The flatbed truck that leaves our facilities is the one that shows up at your door.
  • Replacement parts are in stock at our Wisconsin headquarters, so we can get them to you quickly.
  • We offer a 1-year parts warranty.
  • With lifetime technical support by phone, you can contact us any time and talk with service reps who have years of experience with industrial machinery.

SPECIFICATIONS

Item Number BP-11210CNC
Table Length 125/157"
Back Gauge Length 17144
Return Speed 2.36" / sec.
Maximum Pressure 112 tons
Throat Depth 12.5"
Stroke Distance 4.7"
Approach Speed 2.0" / sec.
Back Gauge Motor 1/2 hp
Bending Speed .6" / sec.
Main Motor 10 hp
Distance Between Housings 102/124"
Distance From Table To Ram 15.3"
Power 220V / 3-phase
Shipping Weight 14500lbs
Shipping Dimensions (Inches) 168x67x96

* specifications subject to change without notice.

More Information
Shipping Cost 1500
Shipping Calculation: All Shipping Costs are calculated after order is placed and inventory is confirmed
Write Your Own Review
You're reviewing:Baileigh PRESS BRAKE BP-11210 CNC
Your Rating