FREE DELIVERY FOR WELDING*
* On Business Days - Purchases $100 or More
2.5% OFF By paying with Check, Wire or ACH
Online and Call-Ahead Orders
* Minimal Purchase Price $100
Toggle Nav
Powermatic PWBS-14CS 14" BANDSAW WITH STAND AND RISER BLOCK
Introducing the PWBS-14CS Bandsaw. It has an extra large, two-piece cast iron table. It consists of a 15" x 15" tilting section and a fixed 15" x 5" extension for a total working surface area of 15" x 20". A balanced, nine-spoke cast iron wheel makes for smooth blade travel, and a Carter quick tension release lever makes blade changing easy. A micro-adjustable dual bearing blade guide system is featured above and below the table, as well as a work lamp and chip blower. A Poly-V belt maximizes power transmission while minimizing noise and vibration. It has full 6" under guide capacity with 13-1/2" frame to blade clearance. The aluminum rip fence comes with a resaw attachment.
was
$2,088.56
Special Price
$1,699.99
SKU
1791216K
FEATURES
- Precision balanced nine spoke cast iron wheels reduces vibration and creates smoother blade travel
- Upper and lower dual ball bearing guides for accurate cuts
- CARTER quick tension lever speeds blade changes, and the de-tension setting extends blade life during non-use
- Chip blower ensures a clean, visible cut line
- Exclusively designed, quick-release precision T-square style rip fence with 4" resaw attachment
- 60 watt adjustable lamp built into the body provides direct light on blade and work piece while cutting (bulb not included)
- Easy to read tensioning gauge settings indicated in "blade width" increments
- Durable micro-adjustable dual bearing blade guide system above and below the table for close blade control with less friction
- Rigid one-piece welded stand requires no assembly
- Includes 6" riser block
????
SPECIFICATIONS
| Band Saw Size/Wheel Diameter (in) | 14 |
| Band Saw Size/Wheel Diameter (In.) | 14 |
| Cutting Capacity Width (In.) | 13-1/2 |
| Cutting Capacity Height (In.) | 6 (12 w/ Riser Block) |
| Blade Length (in) | 93-1/2 |
| Blade Length (In.) | 93-1/2 |
| Minimum Saw Blade Width (in) | 1/8 |
| Minimum Saw Blade Width (In.) | 1/8 |
| Maximum Saw Blade Width (in) | 3/4 |
| Maximum Saw Blade Width (In.) | 3/4 |
| Blade Speed (SFPM) | 3000 |
| Table Size (L x W) (In.) | 15 x 20-1/2 |
| Table Height from Floor (In.) | 44 |
| Table Tilt (Deg.) | 10 Left, 45 Right |
| Dust Port Outside Diameter (in) | 4 |
| Dust Port Outside Diameter (In.) | 4 |
| Dust Collection Minimum CFM Required (CFM) | 600 |
| Motor Power (HP) | 1.5 |
| Motor Phase | 1 |
| Motor Voltage (V.) | 115/230 |
| Prewired Voltage (V.) | 115 |
| Stand Type | Floor |
| Shipping Calculation: | All Shipping Costs are calculated after order is placed |
|---|
Write Your Own Review