The Piranha Model PII-88 ironworker has dual-operator controls for the punch station and shear/coper stations and an Automatic Urethane Hold Down on the Plate and Angle Shear. Both ends of the machine can be operated independently of each other at the same time. A large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling, in addition to a 24 plate shear capacity.
The Piranha Model PII-88 ironworker has dual-operator controls for the punch station and shear/coper stations and an Automatic Urethane Hold Down on the Plate and Angle Shear. Both ends of the machine can be operated independently of each other at the same time. A large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling, in addition to a 24 plate shear capacity.
Standard Features
Complete Punching Attachment with stripper
5 Punch and Die sets
Front and rear 2 position joy stick controls (electric)
Front and rear Remote Electric Foot Switches
Front limit switch stroke control
Set of Round Bar Knives [2 way] (customers choice to 1-1/2)
Set of 20.625 Plate Shear Knives [4 way]
Set of Blank Knives to extend shear to 24
Set of Coper Knives [2 way top] [4 way bottom]
Set of Angle Shear Knives [8 way top] [4 way bottom]
Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available
10 HP 3 Ph.
Angle Shear
5 x 5 x 3/8 **4 x 4 x 1/2
Dimensions (Net) W-L-H Approx.
38 x 90 x 72
Bar Shear Round (min. to max.) Square (min. to max.)
1/4 to 1-1/2 1/2 to 1
Weight (Net) Lbs. Approx.
4700
Put 140 years of industry experience to work for you!Use what our team knows about metal fabrication to help you improve your production and increase your profit.
Industry Leading Cycle TimesPunch holes in less time than other hydraulic ironworker machines.
Urethane StrippersResults in less part distortion, faster cycle times, no need for stripper height adjustment.
Integrated Notching StationLow shear removes fillet for precise, burr-free cuts and clean notches.
Quick-Change ToolingSplit dovetail slide mountingsmake tool changes from punching to bending in less than one minute on all models except P-50.
Automatic Urethane Hold-DownsThis unique Piranha ironworker feature, coupled with a low rake angle, keeps parts from deforming or shifting during the shearing process. The hold-downs work automatically, eliminating the need for time-consuming adjustments between cuts (except on P-50).
ErgonomicsConvenient work height and visibility for all stations. The single work height also provides added benefits when using roller feed tables.
Copyright 2019 Mega Manufacturing, Creators of the Iconic PiranhaHydraulic Ironworker Machine- All Rights Reserved Trademarks displayed on this page are the sole property of their respective owners.
