Piranha P65 Hydraulic Ironworker Machine

The Piranha Model P-65 is Piranhas most popular model of ironworker machine.

• The P-65 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher.
• The P-65 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds
• The P-65 has full electrical control of its stroke with a footswitch and limit switch stroke controls this,coupled with urethane strippers and more horsepower per ton, gives the P-65 the fastest punching stroke in the industry.
• The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-65s capabilities.
• Piranhas incomparable integrated coper/notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part from any angle.

• Standard Features

• Complete Punching Attachment with split dove tail mounting
• 5 Punch and Die sets
• Automatic Urethane Hold Down on the Punch Stripper and on Angle
• Plate and Bar Shear
• Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
• Remote Electric Foot Switch that can be connected at either end of the machine

  Throat Depth	8	Coper-Notcher (Tons) (Max.)	56 2-3/4 x 4 x 1/4
  Open Height	13-1/2	Bending Attachment (Optional)	8, 12, 14, 24
  Closed Height w/o Die Block	9-1/4	Punch End Strokes Per Minute Optional Speed-Up Kit	30 @ 3/4 45 @ 3/4
  Stroke Length	4-1/4	Work Station Height Approx.	42
  Platen Table Size (D-W)	10 x 17	Hydraulics Pump GPM System R/V PSI	7.5 3000
  Punch Hole Size (Max. Material) Max. Hole Size (Material)	65 Tons 1-1/16 (3/4) 5 (1/8)	Fluid Capacity (gal.)	20
  Plate Shear*with fixed hold down	15-1/2 Long *1 x 4 3/4 x 10 5/8 x 15	Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available	7.5 HP 3 Ph.
  Angle Shear** with special blade	5 x 5 x 3/8 **4 x 4 x 1/2	Dimensions (Net) W-L-H Approx.	24 x 66 x 60
  Bar Shear Round (min. to max.) Square (min. to max.)	1/4 to 1-1/2 1/2 to 1	Weight (Net) Lbs. Approx.	2600

• Electric Limit Switches that can be set for stroke control when using foot control
• Set of Round Bar Knives [2 way] (customers choice to 1-1/2)
• Set of 12.125 Plate Shear Knives [4 way]
• Set of Angle Knives [8 way top] [4 way bottom]
• Set of Coper Knives [2 way top] [4 way bottom]
• Chip Buckets (2 each)
• Extra Oil Filter
• Coupling Wrench & 3/8 Allen Wrench
• Integral Lifting Lug for instant portability