FREE DELIVERY FOR WELDING*
* On Business Days - Purchases $100 or More
2.5% OFF By paying with Check, Wire or ACH
Online and Call-Ahead Orders
* Minimal Purchase Price $100
Toggle Nav
Laguna Tools 25X2 DOUBLE DRUM SANDER 220v 5 hp 1ph
Sand two grits in a single pass with a 25×2 Double Drum Sander. Featuring INTELLISAND Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding.
The 25×2 Double Drum Sander features INTELLISAND Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor. Available in Single and 3 Phase power.
was
$4,045.00
Special Price
$3,895.00
SKU
SUPMX-913002
Sanding Capacity: Maximum Width (in): 25, 37, 50
Minimum Length (in): 3-1/2
Maximum Thickness (in): 25 model: 6
37 & 50 models: 12
Minimum Thickness (in): 1/32
Dimensions HxWxD (in): 25 model: 43 x 46 x 31
37 model: 43 x 58 x 31
50 model: 50 x 71 x 31
Drum (in): (extruded aluminum) 25 model: 5 x 25
37 model: 5 x 37
50 model: 5 x 50
Drum speed: 1740 RPM
Dust Hood: (Steel hood, hinged at back 25” model: one (2) 4” vacuum port, min. 1000 CFM recommended
37 & 50 models: (3) – 4 vacuum ports, min. 1800 CFM recommended
Ball bearings (1”): 4, sealed and permanently lubricated
Conveyor Motor: 25 & 37 models: 100 in. -lb. torque, direct drive D.C motor, ranged variable, 0-15 FPM
50 model: 220 in.-lb. torque, direct drive D.C motor, ranged variable, 0-15 FPM
Drive Motor (TEFC): 25 & 37 models: 5 HP
50 model: 7-1/2 H
Power Requirements: 208-230V, 60HZ; 1 Ph, 30 amp service
Shipping Weight (lbs):
25 model: 475
37 model: 525
50 model: 820
| Shipping Cost | 199 |
|---|---|
| Shipping Calculation: | All Shipping Costs are calculated after inventory is confirmed with the mfg. |
Write Your Own Review