KMT H 350 M 12" Autocut

H 350 M

The H350 M is a gravity feed autocut bandsaw capable of mitering 45 to the left and 60 degrees to the right.

The blade will tun off at the end of the cut. The solenoid will hold the sawframe where lifted. The Autocut will insure that each cut is feed exactly at the same rate, eliminating the need to open and close the valve each cut.

The vise is mounted on a rail with a quick release handle it can be moved from either side of the cut.

Nylon blade brush

Carbide guides w/ rollers

(shown with optional conveyor and measuring)

Standard Equipment

One Bi-metal sawblade

Low voltage control

TEFC 3 phase drive motor

Totally enclosed worm gear transmission

Full Coolant System

Full Blade Guarding

Operators Manual Parts List/Schematics

Tool kit

Capacities and Specifications

Capacities shown are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day.

(see chart in pictures)

Optional Accessories

AC200 5' x 15" wide freestanding conveyor (additional 5' sections can bolt together)

AC250 5' x 15" wide conveyor mounted to machine (additional 5' sections can bolt together)

AC109 6' Worktable conveyorinfeedmounted to machine w/ coolant tray

AC110 Additional 6' connecting to AC109

AC111 6' Worktable conveyoroutfeedmounted to machine w/ coolant tray

AC110 Additional 6' connecting to AC111

Saw ManualPdf