FREE DELIVERY FOR WELDING*

* On Business Days - Purchases $100 or More

2.5% OFF By paying with Check, Wire or ACH

Online and Call-Ahead Orders

* Minimal Purchase Price $100
Kalamazoo Industries DS10-2M 2 X 48 INCH BELT AND 10 INCH DISC COMBINATION SANDER

Kalamazoo Industries DS10-2M 2 X 48 INCH BELT AND 10 INCH DISC COMBINATION SANDER

Kalamazoo Industries S612 6 x 48 INCH COMBINATION BELT AND DISC SANDER

Kalamazoo Industries S612 6 x 48 INCH COMBINATION BELT AND DISC SANDER

Kalamazoo Industries DS10-4S 4 x 36 INCH BELT AND 10 INCH DISC COMBINATION SANDER

The DS10-4S combination belt and disc sander comes with a 4 x 36 inch belt sander with that can be position either vertical or horizontal (all that has to be done is rotate the sander frame on the C face motor) cast iron frame quick belt change mechanism removable sander work table 10 disc with an adjustable lockable work table and 1/2HP 1PH 115V motor.

DS10-4S 4 x 36 INCH Belt AND 10 INCH DISC COMBINATION SANDER SPECIFICATION 

  • 10" disc sander with 4" x 36" belt sander.
  • With full boxed OSHA guard Horizontal or vertical belt position.
  • 1/2 HP 1PH TEFC motor 115 volts 1 ph 7.4 amps 230 volt 1 ph 3.7 amps.
  • Factory wired at 115 volt 1 phase 8 ft. 3 prong plug standard.
  • Optional: Without OSHA guard on 4" sander model DS10-4
  • Amp Draw: 115V 7.4 amps and 230V 3.7 amps
  • Shipping weight:  115 lbs.
  • DS10-4S shipping dimensions: L 20" x W 33" x H 31"
  • Option: available in 50HZ and is CE approved.

DS10-4 4 x 36 INCH Belt AND 10 INCH DISC COMBINATION SANDER SPECIFICATION 

    • 10" disc sander with 4" x 36" belt sander.
    • With umbrella guard Horizontal or vertical belt position.
    • 1/2 HP 1PH TEFC motor 115 volts 1 ph 7.4 amps 230 volt 1 ph 3.7 amps.
    • Factory wired at 115 volt 1 phase 8 ft. 3 prong plug standard.
    • Optional: Without OSHA guard on 4" sander model DS10-4
    • Amp Draw: 115V 7.4 amps and 230V 3.7 amps
    • Shipping weight:  115 lbs.
    • DS10-4S shipping dimensions: L 20" x W 33" x H 31"
    • Option: available in 50HZ and is CE approved.

Other DS10-4S 4 x 36 INCH Belt AND 10 INCH DISC COMBINATION SANDER

  • DS10-4 same as above but the belt sander has an umbrella guard.  DS10-4 shipping dimensions: L 17" x W 30" x H 28".

This machine is great for but not limited to the following applications

  • Bevel an Deburr
  • Square and End
  • Round Flat Corners

Part replacement

All parts that Kalamazoo Industries manufacture's for this DS10-4S combination belt and disc sander are replaceable no matter the age of this unit. Additionally all parts are kept in stock.

Where this equipment can be used

The DS10-4S combination sander has applications in the following industries: Energy Oil/Natural Gas Petro/Chemical Knife Manufacturing Automotive Metal Foundries wood working shops as well as many other Manufacturing and Fabrication environments that require deburring.

$1,130.00
SKU
DS10-4S-1

DS10-4S 4 x 36 INCH Belt AND 10 INCH DISC COMBINATION SANDER SPECIFICATION 

  • 10" disc sander with 4" x 36" belt sander.
  • With full boxed OSHA guard, Horizontal or vertical belt position.
  • 1/2 HP 1PH TEFC motor , 115 volts, 1 ph, 7.4 amps, 230 volt, 1 ph, 3.7 amps.
  • Factory wired at 115 volt, 1 phase, 8 ft. 3 prong plug standard.
  • Optional: Without OSHA guard on 4" sander, model DS10-4
  • Amp Draw: 115V 7.4 amps and 230V 3.7 amps
  • Shipping weight:  115 lbs.
  • DS10-4S shipping dimensions: L 20" x W 33" x H 31"
  • Option: available in 50HZ and is CE approved.

DS10-4 4 x 36 INCH Belt AND 10 INCH DISC COMBINATION SANDER SPECIFICATION 

    • 10" disc sander with 4" x 36" belt sander.
    • With umbrella guard, Horizontal or vertical belt position.
    • 1/2 HP 1PH TEFC motor , 115 volts, 1 ph, 7.4 amps, 230 volt, 1 ph, 3.7 amps.
    • Factory wired at 115 volt, 1 phase, 8 ft. 3 prong plug standard.
    • Optional: Without OSHA guard on 4" sander, model DS10-4
    • Amp Draw: 115V 7.4 amps and 230V 3.7 amps
    • Shipping weight:  115 lbs.
    • DS10-4S shipping dimensions: L 20" x W 33" x H 31"
    • Option: available in 50HZ and is CE approved.

Other DS10-4S 4 x 36 INCH Belt AND 10 INCH DISC COMBINATION SANDER

  • DS10-4 same as above but the belt sander has an umbrella guard.  DS10-4 shipping dimensions: L 17" x W 30" x H 28".

This machine is great for but not limited to the following applications

  • Bevel an Deburr
  • Square and End
  • Round Flat Corners

Part replacement

All parts that Kalamazoo Industries manufacture€šÂ¾s for this DS10-4S combination belt and disc sander are replaceable no matter the age of this unit. Additionally all parts are kept in stock.

Where this equipment can be used

The DS10-4S combination sander has applications in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal Foundries, wood working shops, as well as many other Manufacturing and Fabrication environments that require deburring.

More Information
Shipping Calculation: All Shipping Costs are calculated after inventory is confirmed with the mfg.
Write Your Own Review
You're reviewing:Kalamazoo Industries DS10-4S 4 x 36 INCH BELT AND 10 INCH DISC COMBINATION SANDER
Your Rating