FREE DELIVERY FOR WELDING*

* On Business Days - Purchases $100 or More

2.5% OFF By paying with Check, Wire or ACH

Online and Call-Ahead Orders

* Minimal Purchase Price $100
Baileigh PP-0791 END MILL

Baileigh PP-0791 END MILL

Baileigh HAND BENDER - RDB-10

Baileigh HAND BENDER - RDB-10

Baileigh MANUAL TUBE BENDER RDB-050

MANUAL TUBE BENDER RDB-050

Need an affordable but powerful bender with enough capacity for almost about any chassis fabrication shop Baileigh' s patented RDB-050 Manual Tube Bender is revolutionaryin function, capacity, and efficiency.

was $2,305.93 Special Price $1,899.00
SKU
1006768

Need an affordable but powerful bender with enough capacity for almost about any chassis fabrication shop Baileigh' s patented RDB-050 Manual Tube Bender is revolutionaryin function, capacity, and efficiency.

  • Tackles up to 2.5' OD mild steel with a wall thickness of .120" and 2' OD Chrome Moly with a wall thickness of .120' .
  • Choose from 3 bending speeds, depending on material type, OD, and wall thickness, to proper speed for each application.
    • Speed 1 produces 4 per pull. This speed has the most torque, suitable for bending 2' OD Chrome Moly or 2.5' OD mild steel.
    • Speed 2 produces 8 per pull for intermediate materials.
    • Speed 3 produces 12 per pull for lighter gauge materials.
  • Bends up to 200 in one shot without you needing to stop and reset the machine.
  • Anti-springback mechanism holds each bend in place as the operator ratchets forward.
  • No assembly or disassembly needed to produce a bend.
  • All pivot points use aluminum bronze bushings and thrust washers for long machine life.
  • Quick-release hook arm inserts assist when you' re changing over the machine to a different size of tubing. You can do a complete changeover in 1 minute or less.
  • Just walk up to the machine, put your tubing into the hook arm insert, and begin bending. When the bend is complete, return the machine to the home position, pull your bend out' and you' re all set.
  • Comes complete with the stand, bend handle, and degree dial. Just add tooling and you' re ready to bend tube.

U.S Patent No. #8,171,765

SPECIFICATIONS

Item Number RDB-050
Minimum CLR 3"
Minimum OD .75"
Mild Steel Solid Rod 1"
Mild Steel Pipe Schedule 40 Call for Details
Mild Steel Round Tube Wall 2.5" (.120)
Stainless Steel Pipe Schedule 40 Call for Details
Stainless Steel Round Tube Wall 2" (.120)
Chromolly Round Tube Wall 2" (.120)
Aluminum Pipe Sch. 40 Call for Details
Aluminum Round Tube Wall 2.5" (.120)
Max. Clr 7"
Power Manual
Shipping Weight 290lbs
Special Notes tooling not included, contact Baileigh at 920-684-4990 for correct sizing.
Shipping Dimensions (Inches) 36x36x18

* specifications subject to change without notice.

California Proposition 65
More Information
Shipping Cost 130
Shipping Calculation: All Shipping Costs are calculated after order is placed and inventory is confirmed
Write Your Own Review
You're reviewing:Baileigh MANUAL TUBE BENDER RDB-050
Your Rating