FREE DELIVERY FOR WELDING*

* On Business Days - Purchases $100 or More

2.5% OFF By paying with Check, Wire or ACH

Online and Call-Ahead Orders

* Minimal Purchase Price $100
Baileigh DRILL PRESS DP-1500G

Baileigh DRILL PRESS DP-1500G

BAILEIGH DRILL PRESS VARIABLE SPEED DP-1000VS

BAILEIGH DRILL PRESS VARIABLE SPEED DP-1000VS

Baileigh GEAR DRIVEN DRILL PRESS - DP-1850G

The DP-1850G drill press harnesses a lot of power for its price. This gear driven drill press can handle those bigger, tougher jobs at your fabrication or machine shop.

  • 2 hp motor runs on 220-volt 3-phase power.
was $14,741.43 Special Price $11,999.00
SKU
1020697

DESCRIPTION

The DP-1850G drill press harnesses a lot of power for its price. This gear driven drill press can handle those bigger, tougher jobs at your fabrication or machine shop.

  • 2 hp motor runs on 220-volt 3-phase power.
  • 26-3/4' swing to tackle large pieces of material.
  • Drills a maximum capacity of 1.57' with a tapping capacity of up to 1' .
  • Gear head turns at speeds between 90 and 2425 rpm, so you can select the right speed for almost any application.
  • #4 Morse spindle taper feed is electric and completely adjustable.
  • Massive column and cast steel base reduce flexing even when you' re drilling at full capacity.
  • 21-1/4' x 17-1/4' work table with X-pattern T-Slots.
  • .7' table-slots allow for a vise or fixture to get a firm hold on the material.
  • Includes an electronic power-down feed and a coolant system to prolong the drill' s lifetime of use.
  • Equipped with a chuck and an automatic tool ejector to adapt to your project quickly and easily.
  • Comes standard with a protective shield and a halogen light for safer drilling in your shop and elsewhere.
  • Baileigh covers this gear-driven drill press with a 1-year parts warranty plus our unbeatable lifetime technical support by phone.

SPECIFICATIONS

Item Number DP-1850G
Spindle Speeds 12
Max. Drill Capacity 1.57"
Max. Tapping Capacity 7/8"
Swing 26-3/4"
Distance from Spindle to Table 4" to 24-3/8"
Distance from Spindle to Base 47"
Spindle Taper MT-4
Spindle Travel 7-3/4"
Spindle Speed Range 90-2,425 RPM
Power Feed .0047", .0094", .0157"
Table Size 17-1/4"x 21-1/4"
Base Size 33" x 25"
T-Slot Width .7"
Motor 2 hp
Power 220V 3-phase
Shipping Weight 1225lbs
Shipping Dimensions (Inches) 60x44x90

* specifications subject to change without notice.

More Information
Shipping Cost 375
Shipping Calculation: All Shipping Costs are calculated after order is placed and inventory is confirmed
Write Your Own Review
You're reviewing:Baileigh GEAR DRIVEN DRILL PRESS - DP-1850G
Your Rating