* On Business Days - Purchases $100 or More

2.5% OFF By paying with Check, Wire or ACH

Online and Call-Ahead Orders

* Minimal Purchase Price $100
Dake Manual Cold Saws, Technics, Super cut 315

Dake Manual Cold Saws, Technics, Super cut 315

Dake Semi-Automatic Cold Saws-14.5-Ferrous

Dake Semi-Automatic Cold Saws-14.5-Ferrous

Dake Semi-Automatic Cold Saws-14"

Semi-automatic cold saw that has a push-button or foot switch activation, an oversized pedestal base, shroud enclosed head feed cylinder, adjustable pneumatic vise. Variable speed controlled by a frequency inverter increases the material cutting range.

440V model requires step-down transformer for operation (part number: 300674)

Part Number 974355-2 976202-2 976200-2
Voltage 220 V/440 V, 3-Phase 220 V/440 V, 3-phase 220 V/ 440 V, 3-phase
Horsepower 3.5 max 3.5/4.5 3.5/4.5
Cutting Ability Ferrous/Non-Ferrous/Plastic Non-Ferrous / Plastic Ferrous / Non-Ferrous / Plastic
Maximum blade diameter 14in 14-1/2in 14-1/2in
Maximum vise opening 6-5/8" 8-3/4in 8-3/4in
Maximum feed vise opening n/a n/a n/a
Maximum Angle 60 left/ 45 right 45 left 45 / 90 left / right
Slotting No No Yes
Phase 3 3 3
Speeds 20-105 rpm 1,500/3,000 rpm 25/50 rpm
Weight 890 lbs 1,360 lbs 1,360 lbs
Solid round 90 capacity 3-3/8in 4-1/4in 4-1/4in
Solid round 45 capacity 3in 3-5/8in 3-5/8in
Tube 90 capacity 4-3/4" 5-1/16in 5-1/16in
Tube 45 capacity 4in 5in 5in
Square 90 capacity 4-1/8in 4-1/4in 4-1/4in
Square 45 capacity 3-3/8in 3-7/8in 3-7/8in
Rectangle 90 capacity 6-1/4in x 3-1/2in 4in x 7in 4in x 7in
Rectangle 45 capacity 3-3/8in x 2-3/4in 4in x 6in 4in x 6in
Work height 36-3/4in 35in 35in
Height 60in 73in 73in
Width 33in 28in 28in
Depth 50in 39in 39in


  • Push button or foot-switch activation to avoid operator fatigue.

  • Shroud enclosed head feed cylinder with sliding cams for fast cutting stroke adjustment.

  • Additional ball bearing support of hardened and ground spindle shaft to prevent failure.

  • Adjustable pneumatic vise with sliding gib to true up clamping under blade with 1/4 stroke.

  • Oversized pedestal base to reduce vibration.

  • Head rotates 45 right and 60 left of center for easy miter cutting.

  • Removable hardened, serrated vise jaw faces.

  • Ability to add a programmable feed system to make fully automatic with wide range of capabilities.


  • Blade

  • Coolant

  • Saw blade selector calculator

  • Tools kit for changing blades

  • Instruction and service manual

  • Adjustable positive stop

More Information
Shipping Cost 0.00
Shipping Calculation: All Shipping Costs are calculated after order is placed and inventory is confirmed
Write Your Own Review
You're reviewing:Dake Semi-Automatic Cold Saws-14"
Your Rating