All Boschert notchers offer superior performance, clean cuts and high accuracy. The four notchers in the Silver Eagle series feature Boscherts patented TRI-GIDE technology, a 3-point ram guidance system that gives the machine its world-famous precision and durability.
The Silver Eagle notchers offer 8-7/8 x 8-7/8 90 fixed angle front to back cutting with 1/4in mild steel or 5/32 stainless steel capacity. The 43-inch wide by 31-inch deep super-size table sets the Silver Eagle series apart. The table has a milled bed surface, so materials do not float or stick. The Silver Eagle machines are adjustable from 35 to 50 strokes per minute. They feature an internal stop for shearing, two material hold downs, two heavy duty stops with 12 sliding bars, scale and T-shot left to right at front of bed, scale and T-shot parallel to the blades and scale on left and right side of the tabletop. They are wired for 220v/60c/3ph and feature a moveable electrical foot pedal and scrap buckets.
The Silver Eagle notchers can also be configured with a second station on the rear of the table that can be fitted as either a coping station or a punching station. Alternatively, the Silver Eagle Quick notcher offers a second station that can be changed between punching, coping and notching.
The Silver Eagle with the coping station has capacities for 5/32 (4mm) mild steel (mild steel designated as 50,000 psi) or 1/8 (3mm) stainless steel (stainless steel is designated as 75,000 psi). It can cope 3.937 deep by 1 to infinity by moving the stock.
The Silver Eagle with the punching station features Trumpf-style tooling with capacities of 5/32 (4mm) mild steel (mild steel designated as 50,000 psi), 1/8 (3mm) stainless steel (stainless steel is designated as 75,000 psi). Its maximum punch size is 1 1/8 inches. The punching table is 43-inches wide by 13-inces deep.
The Silver Eagle Quick notcher is equipped with quick-change coping, punching or notching tool sets. The second notching station features 4in blades mounted in a cassette with the correct clearance preset. It has capacities of 5/32 mild steel (mild steel designated as 50,000 psi), 1/8 stainless steel (stainless steel is designated as 75,000 psi). Notch angles can be adjusted from 14- to 45-degree angles.
Features Notching Station Download Boschert Silver Eagle Quick Hydraulic Notcher Overview 1/4 mild steel*, 5/32 stainless steel** capacity 8-7/8 x 8-7/8 90 degree notch Super size table, 43 wide by 31 deep Milled bed surface for no float or stick operation Moveable electrical foot pedal Front to back cutting to hold material against stop Adjustable stroke, 35 to 50 per minute Two material hold downs Two heavy duty stops with 12 sliding bars Scale and T-shot left to right at front of bed Scale and T-shot parallel to the blades Scale on left and right side of table top Wired 220v/60c/3ph Internal stop for shearing Scrap bucket Punching Station Trumpf style tooling 5/32 mild steel*, 1/8 stainless steel** Maximum punch size: 1-1/8 Size of punching table: 43 wide by 13 deep Scrap bucket Coping Station 5/32 mild steel*, 1/8 stainless steel** Cope 3.937 deep by 1 to infinity by moving the stock Scrap bucket Silver Eagle Quick Second Station for Coping, Punching or Notching A quick-change system for the second station with the blades mounted in a cassette with the correct clearance preset. Cassettes for coping, punch tools and small notches are available. Secondary Notching Station 5/32 mild steel*, 1/8 stainless steel** 15-45 degree angle 4 long blades Scrap bucket * mild steel designated as 50,000 psi ** Stainless designated as 75,000 psi