Piranha P90 Hydraulic Ironworker Machine

Availability: In stock
SKU
P90

P-90 Single Operator Ironworker Machine

The Piranha Model P-90 ironworker picks up where the P-65 leaves off for applications requiring more tonnage.

  • The P-90 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher.
  • The P-90 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds
  • The P-90 has full electrical control of its stroke with a footswitch and limit switch stroke controls.
  • The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-90s capabilities.
  • Piranhas incomparable integrated coper/notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part from any angle.

When comparing ironworkers, look at the complete package.

$29,900.00

Details

P-90 Single Operator Ironworker Machine

The Piranha Model P-90 ironworker picks up where the P-65 leaves off for applications requiring more tonnage.

  • The P-90 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher.
  • The P-90 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds
  • The P-90 has full electrical control of its stroke with a footswitch and limit switch stroke controls.
  • The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-90s capabilities.
  • Piranhas incomparable integrated coper/notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part from any angle.

When comparing ironworkers, look at the complete package.

Standard Features

  • Complete Punching Attachment with split dove tail mounting
  • 5 Punch and Die sets
  • Automatic Urethane Hold Down on the Punch Stripper and on Angle
  • Plate and Bar Shear
  • Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
  • Remote Electric Foot Switch that can be connected at either end of the machine
  • Electric Limit Switches that can be set for stroke control when using foot control
  • Set of Round Bar Knives [2 way] (customers choice to 2)
  • Set of 14.50 Plate Shear Knives [4 way]
  • Extra Blank Knife to extend shear to 18
  • Set of Angle Knives [8 way top] [4 way bottom]
  • Set of Coper Knives [2 way top] [4 way bottom]
  • Chip Buckets (2 each)
  • Extra Oil Filter
  • Coupling Wrench & 3/8 Allen Wrench
  • Integral Lifting Lug for instant portability

P-90 Capacities & Specifications

Throat Depth 10 Coper-Notcher (Tons) (Max.) 75 3-1/2 x 5 x 3/8
Open Height 15 Bending Attachment (Optional) 12, 24
Closed Height w/o Die Block 10-1/8 Punch End Strokes Per Minute Optional Speed-Up Kit 32 @ 3/4 45 @ 3/4
Stroke Length 4-7/8 Work Station Height Approx. 42
Platen Table Size (D-W) 12 x 21 Hydraulics Pump GPM System R/V PSI 10.5 2900
Punch Hole Size (Max. Material) Max. Hole Size (Material) 90 Tons 1-1/8 (1) 5 (3/16) Fluid Capacity (gal.) 25
Plate Shear 18 Long 1 x 8 3/4 x 12 1/2 x 18 Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available 10 HP 3 Ph.
Angle Shear 5 x 5 1/2 Dimensions (Net) W-L-H Approx. 31 x 79 x 64
Bar Shear Round (min. to max.) Square (min. to max.) 1/2 to 2 1/2 to 1-3/8 Weight (Net) Lbs. Approx. 4250

Request More Information and Price Quote

Put 140 years of industry experience to work for you!Use what our team knows about metal fabrication to help you improve your production and increase your profit.

Request More Information

  • Industry Leading Cycle TimesPunch holes in less time than other hydraulic ironworker machines.
  • Urethane StrippersResults in less part distortion, faster cycle times, no need for stripper height adjustment.
  • Integrated Notching StationLow shear removes fillet for precise, burr-free cuts and clean notches.
  • Quick-Change ToolingSplit dovetail slide mountingsmake tool changes from punching to bending in less than one minute on all models except P-50.
  • Automatic Urethane Hold-DownsThis unique Piranha ironworker feature, coupled with a low rake angle, keeps parts from deforming or shifting during the shearing process. The hold-downs work automatically, eliminating the need for time-consuming adjustments between cuts (except on P-50).
  • ErgonomicsConvenient work height and visibility for all stations. The single work height also provides added benefits when using roller feed tables.
P-50 P-65 P-90 P-110 P-140
Throat Depth 5 8 10 12 12
Open Height 11-1/2 13-1/2 15 15-1/2 15-1/2
Closed Height w/o Die Block 7-3/4 9-1/4 10-1/8 10-1/4 10-1/4
Stroke Length 3-3/4 4-1/4 4-7/8 5-1/4 5-1/4
Platen Table Size (D-W) 8 x 16 10 x 17 12 x 21 14-1/2 x 21 14-1/2 x 21
Punch Hole Size (Max. Material) Max. Hole Size (Material) 50 Tons 13/16 (3/4) 3 in (3/16) 65 Tons 1-1/16 (3/4) 5 (1/8) 90 Tons 1-1/8 (1) 5 (3/16) 110 Tons 1-7/16 (1) 5 (1/4) 140 Tons 1-3/4 (1) 5 (5/16)
Plate Shear 13 Long 3/4 x 6 1/2 x 10 3/8 x 12 1/4 x 13 15-1/2 Long *1 x 4 3/4 x 10 5/8 x 15 18 Long 1 x 8 3/4 x 12 1/2 x 18 20-1/2 Long 1 x 12 3/4 x 18 1/2 x 20 20-1/2 Long 1 x 14 3/4 x 18 1/2 x 20
Angle Shear 3 x 3 x 3/8 3-1/2 x 3-1/2 x 5/16 5 x 5 x 3/8 **4 x 4 x 1/2 5 x 5 1/2 6 x 6 x 5/8 6 x 6 x 5/8
Bar Shear Round (min. to max.) Square (min. to max.) Optional 1/4 to 1-3/8 1/2 to 1 1/4 to 1-1/2 1/2 to 1 1/2 to 2 1/2 to 1-3/8 1/2 to 2 1/2 to 1-3/8 1/2 to 2 1/2 to 1-3/8
Coper-Notcher (Tons) (Max. Material) 40 2-1/4 x 3 x 1/4 56 2-3/4 x 4 x 1/4 75 3-1/2 x 5 x 3/8 95 4 x 6 x 3/8 95 4 x 6 x 3/8
Optional Bending Attach. 6,12 8, 12, 14, 24 12, 24 12, 24 12, 24
Punch End Strokes Per Minute 30 @ 1/2 N/A 30 @ 3/4 45 @ 3/4 32 @ 3/4 45 @ 3/4 30 @ 3/4 41 @ 3/4 30 @ 3/4 35 @ 3/4
Work Station Height Approx. 42 42 42 44 44
Hydraulics Pump GPM System R/V PSI 3.6 2800 7.5 3000 10.5 2900 10.5 3200 15 3500
Fluid Capacity (gal.) 12 20 25 25 25
Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available 3 HP 3 Ph. 7.5 HP 3 Ph. 10 HP 3 Ph. 10 HP 3 Ph. 15 HP 3 Ph.
Dimensions (Net) W-L-H Approx. 24 x 55 x 58 24 x 66 x 60 31 x 79 x 64 35 x 90 x 66.5 35 x 90x 68.5
Weight (Net) Lbs. Approx. 1700 2600 4250 5800 6200

More Information

Shipping Cost

0.00

Shipping Calculation:

All Shipping Costs are calculated after order is placed and inventory is confirmed

Reviews

Share your thoughts with other customers

You're reviewing:

Piranha P90 Hydraulic Ironworker Machine
Related Products
Subscription