P-110 Single Operator Ironworker Machine
The Piranha Model P-110 ironworker machine is a strong workhorse capable of performing in heavy applications.
- The P-110 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher.
- The P-110 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds
- The P-110 has full electrical control of its stroke with a footswitch and limit switch stroke controls.
- The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-110s capabilities.
When comparing ironworkers, look at the complete package.
Standard Features
- Complete Punching Attachment with split dove tail mounting
- 5 Punch and Die sets
- Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear
- Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
- Remote Electric Foot Switch that can be connected at either end of the machine
- Electric Limit Switches that can be set for stroke control when using foot control
- Set of Round Bar Knives [2 way] (customers choice to 2)
- Set of 16.625 Plate Shear Knives [4 way]
- Set of 20.5 Plate Shear Knives [4 way] (instead of Round Bar Knives and 16.625 Plate Shear Knives)
- Extra Blank Knife to extend shear to 20.5
- Set of Angle Knives [8 way top] [4 way bottom]
- Set of Coper Knives [2 way top] [4 way bottom]
- Chip Buckets (2 each)
- Extra Oil Filter
- Coupling Wrench & 3/8 Allen Wrench
- Integral Lifting Lug for instant portability
|
P-50 |
P-65 |
P-90 |
P-110 |
P-140 |
| Throat Depth |
5 |
8 |
10 |
12 |
12 |
| Open Height |
11-1/2 |
13-1/2 |
15 |
15-1/2 |
15-1/2 |
| Closed Height w/o Die Block |
7-3/4 |
9-1/4 |
10-1/8 |
10-1/4 |
10-1/4 |
| Stroke Length |
3-3/4 |
4-1/4 |
4-7/8 |
5-1/4 |
5-1/4 |
| Platen Table Size (D-W) |
8 x 16 |
10 x 17 |
12 x 21 |
14-1/2 x 21 |
14-1/2 x 21 |
| Punch Hole Size (Max. Material) Max. Hole Size (Material) |
50 Tons 13/16 (3/4) 3 in (3/16) |
65 Tons 1-1/16 (3/4) 5 (1/8) |
90 Tons 1-1/8 (1) 5 (3/16) |
110 Tons 1-7/16 (1) 5 (1/4) |
140 Tons 1-3/4 (1) 5 (5/16) |
| Plate Shear |
13 Long 3/4 x 6 1/2 x 10 3/8 x 12 1/4 x 13 |
15-1/2 Long *1 x 4 3/4 x 10 5/8 x 15 |
18 Long 1 x 8 3/4 x 12 1/2 x 18 |
20-1/2 Long 1 x 12 3/4 x 18 1/2 x 20 |
20-1/2 Long 1 x 14 3/4 x 18 1/2 x 20 |
| Angle Shear |
3 x 3 x 3/8 3-1/2 x 3-1/2 x 5/16 |
5 x 5 x 3/8 **4 x 4 x 1/2 |
5 x 5 1/2 |
6 x 6 x 5/8 |
6 x 6 x 5/8 |
| Bar Shear Round (min. to max.) Square (min. to max.) |
Optional 1/4 to 1-3/8 1/2 to 1 |
1/4 to 1-1/2 1/2 to 1 |
1/2 to 2 1/2 to 1-3/8 |
1/2 to 2 1/2 to 1-3/8 |
1/2 to 2 1/2 to 1-3/8 |
| Coper-Notcher (Tons) (Max. Material) |
40 2-1/4 x 3 x 1/4 |
56 2-3/4 x 4 x 1/4 |
75 3-1/2 x 5 x 3/8 |
95 4 x 6 x 3/8 |
95 4 x 6 x 3/8 |
| Optional Bending Attach. |
6,12 |
8, 12, 14, 24 |
12, 24 |
12, 24 |
12, 24 |
| Punch End Strokes Per Minute |
30 @ 1/2 N/A |
30 @ 3/4 45 @ 3/4 |
32 @ 3/4 45 @ 3/4 |
30 @ 3/4 41 @ 3/4 |
30 @ 3/4 35 @ 3/4 |
| Work Station Height Approx. |
42 |
42 |
42 |
44 |
44 |
| Hydraulics Pump GPM System R/V PSI |
3.6 2800 |
7.5 3000 |
10.5 2900 |
10.5 3200 |
15 3500 |
| Fluid Capacity (gal.) |
12 |
20 |
25 |
25 |
25 |
| Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available |
3 HP 3 Ph. |
7.5 HP 3 Ph. |
10 HP 3 Ph. |
10 HP 3 Ph. |
15 HP 3 Ph. |
| Dimensions (Net) W-L-H Approx. |
24 x 55 x 58 |
24 x 66 x 60 |
31 x 79 x 64 |
35 x 90 x 66.5 |
35 x 90x 68.5 |
| Weight (Net) Lbs. Approx. |
1700 |
2600 |
4250 |
5800 |
6200 |