Kalamazoo Industries DS10-4S 4 x 36 INCH BELT AND 10 INCH DISC COMBINATION SANDER

The DS10-4S combination belt and disc sander comes with a 4 x 36 inch belt sander with that can be position either vertical or horizontal (all that has to be done is rotate the sander frame on the C face motor), cast iron frame, quick belt change mechanism,ƒâ€š removable sander work table, 10 disc, with an adjustable lockable work table and 1/2HP 1PH 115V motor.

DS10-4S 4 x 36 INCH Belt AND 10 INCH DISC COMBINATION SANDER SPECIFICATIONƒâ€š 

• 10ƒÂ¢¢â€šÂ¬³ disc sander with 4ƒÂ¢¢â€šÂ¬³ x 36ƒÂ¢¢â€šÂ¬³ belt sander.
• With full boxed OSHA guard, Horizontal or vertical belt position.
• 1/2 HP 1PH TEFC motor , 115 volts, 1 ph, 7.4 amps, 230 volt, 1 ph, 3.7 amps.
• Factory wired at 115 volt, 1 phase, 8 ft. 3 prong plug standard.
• Optional: Without OSHA guard on 4ƒÂ¢¢â€šÂ¬³ sander, model DS10-4
• Amp Draw: 115V 7.4 amps and 230V 3.7 amps
• Shipping weight:ƒâ€š  115 lbs.
• DS10-4S shipping dimensions: L 20ƒÂ¢¢â€šÂ¬³ x W 33ƒÂ¢¢â€šÂ¬³ x H 31ƒÂ¢¢â€šÂ¬³
• Option: available in 50HZ and is CE approved.

DS10-4 4 x 36 INCH Belt AND 10 INCH DISC COMBINATION SANDER SPECIFICATIONƒâ€š 

• • 10ƒÂ¢¢â€šÂ¬³ disc sander with 4ƒÂ¢¢â€šÂ¬³ x 36ƒÂ¢¢â€šÂ¬³ belt sander.
  • With umbrella guard, Horizontal or vertical belt position.
  • 1/2 HP 1PH TEFC motor , 115 volts, 1 ph, 7.4 amps, 230 volt, 1 ph, 3.7 amps.
  • Factory wired at 115 volt, 1 phase, 8 ft. 3 prong plug standard.
  • Optional: Without OSHA guard on 4ƒÂ¢¢â€šÂ¬³ sander, model DS10-4
  • Amp Draw: 115V 7.4 amps and 230V 3.7 amps
  • Shipping weight:ƒâ€š  115 lbs.
  • DS10-4S shipping dimensions: L 20ƒÂ¢¢â€šÂ¬³ x W 33ƒÂ¢¢â€šÂ¬³ x H 31ƒÂ¢¢â€šÂ¬³
  • Option: available in 50HZ and is CE approved.

Otherƒâ€š DS10-4S 4 x 36 INCH Belt AND 10 INCH DISC COMBINATION SANDER

• DS10-4 same as above but the belt sander has an umbrella guard.ƒâ€š ƒâ€š DS10-4 shipping dimensions: L 17ƒÂ¢¢â€šÂ¬³ x W 30ƒÂ¢¢â€šÂ¬³ x H 28ƒÂ¢¢â€šÂ¬³.

This machine is great for but not limited to the following applications

• Bevel an Deburr
• Square and End
• Round Flat Corners

Part replacement

All parts that Kalamazoo Industries manufactureƒÂ¢¢â€šÂ¬¢â€žÂ¢s for this DS10-4S combination belt and disc sander are replaceable no matter the age of this unit. Additionally all parts are kept in stock.

Where this equipment can be used

The DS10-4S combination sander has applications in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal Foundries, wood working shops, as well as many other Manufacturing and Fabrication environments that require deburring.