Dake Mitering Bandsaws

Hydraulic controlled down feed with adjustable manual return

Automatic shut off at the end of the cut

Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut

Powerful, flame tempered, manual clamping vise. Hand wheel adjusted with quick release lever for rapid vise opening and closing action. The vise clamps material firmly

Traversing vise can be used left or right of the blade

Ergonomic designed for operator’s comfort and control

Gearbox is direct bolted to the bow for less vibration, and positive drive gear box is direct driven via steel and bronze gears, no belts and pulleys to contend with

CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch and blade cover interlock

Blade tensioning is done via. A hand wheel and color coded gauge tensioning system taking the guesswork out of tensioning

Miters up to 60° right / 45° left. Mitering pre-sets with flip up and pin stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t

Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable

Electric coolant pump and self-contained coolant system

Steel fabricated base, and stock stop gauge

Steel base

1 standard bi-metal blade

Traversing, manual vise

Coolant

Stock stop gauge